GLDS - GL245C

Defines GLUTRITI Settings
GLUTRITI uses common code GLDS GL245C for several settings. This common code may be setup to automatically post JE Batches created by the GLUTRITI (JE Table Interface) process. See KB 6847 for more information on how GLUTRITI works. Note: Depending on the version of BusinessPLUS, GLUT RITI common code, short description NETSIGHT may need to be created to produce 7i sets.
Code Category: GLDS
Code Value: GL245C
Short Description: Enter "ON." "TEST" in the short description, then GLUTRITI will load test data into the glje_jeint_mstr and the glj_jeint_dtl.  The batch IDs for the test data will be JEIBAT1 and JEIBAT2. "DEBUG" in the short description turns on debug. 
Medium Description: Not required.
Long Description: Not required.
Associated Numeric Values
1-5: Reserved for future use.
Associated Codes
1: Enter the mask that gl245.cbl will run (if this code is blank, it uses "GLUTRIAJ"; if the common code doesn't exist, it uses "GLUTRIIJ").
2: Enter the printer to be used when the process is run from the command line or a job-scheduler.
3: Enter the set type. Default is DS.
4-5: Reserved for future use.
Associated Descriptions
1-5: Reserved for future use.