GLER - XXXXXXXX

Override / Modify Specific Date Warnings
This common code allows the user to override and / or modify specific date warning error codes. The code category should be set up as GLER with the code value equal to the BusinessPLUS mask that the date warnings will be overridden and / or modified for. The error codes that can be changed are GL 473, GL 479, GL 480, GL 481, GL482, GL483, GL484, GL 485, GL 486, and GL 497. Any of these error codes may be overridden for all masks by changing the "Nature" field on their NUUPER screen to "I" for Ignore.
Code Category: GLER
Code Value: XXXXXXXX (= the mask of the process to be affected, e.g., GLJEUB, GLJEBP)
Short Description: Enter "OFF" to disable this common code.
Medium Description: Used to describe the common code.
Long Description: Used to describe the common code.
Associated Numeric Values
1-5: Reserved for future use.
Associated Codes
1-5: Enter error codes to override / modify, in the following format; GL xxxn (xxx = the error number; n = the error nature; "I" for IGNORE, "F" for FATAL, "W" for WARN). If the error nature is left blank then the error nature will not change. Note: Do not forget there is a space between the GL and the error number (e.g., GL 473I – If the common code was GLER-GLJEUB; the system would ignore all GL 473 errors when running GLJEUB).
Associated Descriptions
1-5: Same as Associated Codes (1-5).